WNAP-6306

2.4GHz 802.11n Wireless Outdoor Access Point

 
 
Flexible Outdoor Wireless Network
PLANET WNAP-6306 Wireless Outdoor Access Points brings users greatly more flexibility in extending outdoor wireless coverage as it is designed to be easily attached to the antenna directly. With built-in N-Type antenna connector, the WNAP-6306 can directly connect with various type and high gain antenna* to cover wide range and deliver much farther wireless connection over 10Km. Adopting IEEE 802.11n advanced 1T1R MIMO technology; the WNAP-6306 provides reliable wireless network coverage and incredible improvement in the wireless performance. It can deliver data rate up to 150Mbps, which is three times faster than normal 802.11g wireless devices.

* Available antenna models for the WNAP-6306: ANT-OM8, ANT-OM15, ANT-FP9, ANT-FP18, ANT-SE18, ANT-YG13, ANT-YG20, and ANT-GR21.
 
 
Easy Plug-n-Link
The WNAP-6306 especially benefits users to easily build outdoor wireless network with its Plug-n-Link capability via the built in N-Type antenna connector. The N-Type antenna connector is most commonly adapted with outdoor antenna and the mounting-free design of outdoor enclosure. Users can directly plug the WNAP-6306 into the mounted antenna, and then the wireless link is constructed immediately. Therefore, even users who never experience the wireless network installation can accomplish the wireless deployment quickly.
 
 
Multiple Operating & Wireless Modes
The WNAP-6306 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater / Universal Repeater), allowing various applications and giving users more comprehensive experience. It also helps user to easily build wireless network and extend the wireless range of existing wireless network.
 
 
Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-6306 integrates WPA / WPA2, WPA-PSK and WPA2-PSK to protect your wireless LAN security. It provides wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and prevent unauthorized wireless connection. Furthermore, the WNAP-6306 features the Dual-SSID function to enable you setup two different wireless networks with the WNAP-6306 serving as a virtual access point for segmented networks tailored to any office or industrial need.

Perfect Solution for Outdoor Environment
The WNAP-6306 is perfectly suitable to be installed in outdoor environments and exposed locations. With its IP65 casing protection, the WNAP-6306 can perform stably under rigorous weather conditions such as heavy rain and wind. The WNAP-6306 applies the proprietary Power over Ethernet (PoE) design, so it can be easily installed in any area where power outlets are unavailable. It is the best way using the WNAP-6306 to build outdoor wireless access applications between buildings on campuses, businesses, rural areas and etc.
 
 
Ordering Information
WNAP-6306 2.4GHz 802.11n Wireless Outdoor Access Point
 
Accessories
ANT-OM8 8dBi Omni Directional Antenna
ANT-OM15 15dBi Omni Directional Antenna
ANT-FP9 9dBi Flat Panel Directional Antenna
ANT-FP18 18dBi Flat-Panel Directional Antenna
ANT-SE18 12-18dBi Adjustable Sector Antenna
ANT-YG13 13dBi Yagi Directional Antenna
ANT-YG20 20dBi Yagi Directional Antenna
ANT-GR21 21dBi Grid Directional Antenna
WL-LTNA 2.4/5GHz Lightning Arrester (N-male to N-female)
Longer distance coverage between LAN connections
The WNAP-6306 is a cost-effective outdoor wireless solution for widely open space applications. It is best suitable for outdoor wireless connections between buildings. 

With built-in N-type Antenna connector and high output power with multiple adjust Tx controller, the WNAP-6306 provides higher coverage and longer distance wireless connection. It also allows users to easily install CPE devices and adjust the suitable value in appropriate locations. 

*Sincerely suggest matching the same model in outdoor wireless bridge application for getting best performance.
 
 
 
Ordering Information
WNAP-6306 2.4GHz 802.11n Wireless Outdoor Access Point
 
Accessories
ANT-OM8 8dBi Omni Directional Antenna
ANT-OM15 15dBi Omni Directional Antenna
ANT-FP9 9dBi Flat Panel Directional Antenna
ANT-FP18 18dBi Flat-Panel Directional Antenna
ANT-SE18 12-18dBi Adjustable Sector Antenna
ANT-YG13 13dBi Yagi Directional Antenna
ANT-YG20 20dBi Yagi Directional Antenna
ANT-GR21 21dBi Grid Directional Antenna
WL-LTNA 2.4/5GHz Lightning Arrester (N-male to N-female)
Industrial Compliant Wireless LAN & LAN
　　• Compliant with IEEE 802.11n wireless technology capable of up to 150Mbps data rate
　　• Backward compatible with 802.11b/g standard
　　• Equipped with 10/100Mbps RJ-45 LAN Port, Auto MDI/ MDI-X supported

RF Interface Characteristics
　　• Built-in N-Type Antenna Connector
　　• High Output Power with multiple adjustable transmit power control

Outdoor Environmental Characteristics
　　• IP65 Enclosure, Passive Power Over Ethernet Design
　　• Operating Temperature: -20 ~ 70 Degree C

Multiple Operation & Wireless Mode
　　• Multiple Wireless Modes: AP, Client, WDS PtP / PtMP, Repeater, Universal Repeater
　　• Dual-SSID capable

Secure Network Connection
　　• Supports Software Wi-Fi Protected Setup (WPS)
　　• Advanced security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES)
　　• MAC Filtering up to 20 clients

Easy Installation & Management
　　• User friendly Web-Based UI with On-line Help
　　• System status monitoring includes DHCP Client, Associated List, System Log
　　• DHCP Server, UPnP support
　　• Wireless LED Thresholds for antenna alignment
　　• Wake-On-LAN(WOL) support to allow remotely wake up a WOL enabled host
　　• Easy deployment with mounting-free mechanism
　　• Easy Plug-n-Link with lightweight design
 
 
Ordering Information
WNAP-6306 2.4GHz 802.11n Wireless Outdoor Access Point
 
Accessories
ANT-OM8 8dBi Omni Directional Antenna
ANT-OM15 15dBi Omni Directional Antenna
ANT-FP9 9dBi Flat Panel Directional Antenna
ANT-FP18 18dBi Flat-Panel Directional Antenna
ANT-SE18 12-18dBi Adjustable Sector Antenna
ANT-YG13 13dBi Yagi Directional Antenna
ANT-YG20 20dBi Yagi Directional Antenna
ANT-GR21 21dBi Grid Directional Antenna
WL-LTNA 2.4/5GHz Lightning Arrester (N-male to N-female)
Hardware Specification
Standard support IEEE 802.11b/g
IEEE 802.11n
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow Control
Chipset Ralink RT3050
Memory 16 Mbytes DDR SDRAM
4 Mbytes Flash
Interface Wireless IEEE 802.11b/g/n
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
Interface Wireless IEEE 802.11b/g/n
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
Antenna Built-in N-Type (N-Male) Antenna Connector
Enclosure IP65 waterproof case
PoE Passive PoE / 15V DC
LAN RJ-45 Pin Assignment: PIN 4,5(+), PIN 7,8(-)
Dimension (D x H) 46 x 205 mm
Weight 192g
Wireless Interface Specification
Frequency Band 2.4~2.4835GHz
Modulation Transmission/Emission Type: DSSS / OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, QPSK, CCK
Data Rate 802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
802.11n (20MHz): up to 72Mbps
802.11n (40MHz): up to 150Mbps
Opt. Channel America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power 802.11b: 20 ± 1dBm
802.11g: 19 ± 1dBm
802.11n: 16 ± 1dBm
Receiver Sensitivity 802.11b: -84dBm
802.11g: -68dBm
802.11n (20MHz): -65dBm
802.11n (40MHz): -62dBm
Media Access Control CSMA/CA
Output Power Control Range 1~100, default:100
Power Requirements 15V DC, 1A (switching)
Wireless Management Features
Wireless Mode ‧AP
‧Client 
‧WDS PtP
‧WDS PtMP
‧WDS Repeater (AP+WDS)
‧Universal Repeater (AP+Client)
Channel Width 20MHz / 40MHz
Encryption Security 64/128-bits WEP
WPA, WPA-PSK
WPA2, WPA2-PSK
AP Isolation/WLAN Partition Able to isolate each connected wireless client from each other to access mutually.
Wireless Security Wireless MAC address filtering
WPS (WiFi Protected Setup )
Enable/Disable SSID Broadcast
B/G Protection Mode A protection mechanism prevents collisions among 802.11b/g modes
Association List Display current status of the wireless client associated with AP
Max. Wireless Client 25
Max. WDS AP 4
Software
LAN Built-in DHCP server supporting static IP address distributing
DHCP Reserve
Access Control MAC filtering up to 20 MAC address
Max. Wired Client 60
Applications & Game UPnP support
Management Web UI, DHCP Client, WOL
Diagnostic tool System Log
Environment & Certification
Operation Temperature: -20~70 Degree C
Humidity: 10~95% non-condensing
Storage Temperature: -30~80 Degree C
Humidity: 5~95% non-condensing
Regulatory CE / RoHS
 
Ordering Information
WNAP-6306 2.4GHz 802.11n Wireless Outdoor Access Point
 
Accessories
ANT-OM8 8dBi Omni Directional Antenna
ANT-OM15 15dBi Omni Directional Antenna
ANT-FP9 9dBi Flat Panel Directional Antenna
ANT-FP18 18dBi Flat-Panel Directional Antenna
ANT-SE18 12-18dBi Adjustable Sector Antenna
ANT-YG13 13dBi Yagi Directional Antenna
ANT-YG20 20dBi Yagi Directional Antenna
ANT-GR21 21dBi Grid Directional Antenna
WL-LTNA 2.4/5GHz Lightning Arrester (N-male to N-female)

Datasheet

Date Version Description Download
2012-05-04 1.0 WNAP-6306
 

Firmware

Date Version Description Download
2012-10-26 EN-1.1.15641 1.Modify MAC address allocation to 4 units for one device.
2. Modify default domain to ETSI.
 

Quick Guide

Date Version Description Download
2012-03-30 1.0 Initial Release.
 

User's Manual

Date Version Description Download
2012-04-27 1.0 Initial Release.
 

EC Declaration

Date Version Description Download
2012-04-27 1.0 Initial Release.
 
 
Ordering Information
WNAP-6306 2.4GHz 802.11n Wireless Outdoor Access Point
 
Accessories
ANT-OM8 8dBi Omni Directional Antenna
ANT-OM15 15dBi Omni Directional Antenna
ANT-FP9 9dBi Flat Panel Directional Antenna
ANT-FP18 18dBi Flat-Panel Directional Antenna
ANT-SE18 12-18dBi Adjustable Sector Antenna
ANT-YG13 13dBi Yagi Directional Antenna
ANT-YG20 20dBi Yagi Directional Antenna
ANT-GR21 21dBi Grid Directional Antenna
WL-LTNA 2.4/5GHz Lightning Arrester (N-male to N-female)