Renewable Energy PoE System

Display # 

BSP-360

  Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch  
Industry-leading Integration of PoE Technology and Renewable Power SystemPLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Managed Ethernet Switch, BSP-360, is designed for deploying a surveillance or wireless network and remotely monitoring and managing the IP-based devices. Based on its green technology, the BSP-360 can be charged by the inexhaustible and natural source of energy, such as solar, wind and hydroelectric power to conserve energy so as to economically power these remote IP cameras and wireless APs, especially used for such expansive applications as dams, forests, deserts, national parks, nature/animal protection areas and highways.     Zero-Carbon and Stable Power SupplyThe BSP-360 utilizes the solar power sourcing and co-works with the common nickel-cadmium battery or lead-acid battery to form an independent solar power supply system for outdoor network system. The BSP-360 delivers zero-carbon and uninterruptible PoE power supply for continuous outdoor wireless and IP surveillance applications without the need of any cabling. It can power the client devices and can be charged at the same time during the day to enable to continue the operation at night.     Built-in Unique Power Functions for Battery ManagementAs it is the power managed for battery and power consumption, the BSP-360 features the following special power management functions: Battery current usage and status Battery capacity statistics Low voltage cut-off protection   Battery Current Usage status and StatisticsThe administrator can remotely access the BSP-360 to know the power status of the battery and renewable energy, and the estimated time of power consumption.     Low Voltage Cut-Off ProtectionIf the power is too low to empower the system and IP devices, the system will automatically power off the device with low priority to make sure the system works normally, and an alert is then sent to the administrator at the same time.     Built-in Unique PoE Functions for Powered Devices ManagementAs it is the managed PoE switch for surveillance, wireless and VoIP networks, the BSP-360 features the following special PoE management functions: PD alive check Scheduled power recycling PoE schedule PoE usage monitoring   Intelligent Powered Device Alive CheckThe BSP-360 can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the BSP-360 will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.     Scheduled Power RecyclingThe BSP-360 allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.     PoE Schedule for Energy SavingUnder the trend of energy saving worldwide and contributing to environmental protection, the BSP-360 can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.     PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE UsageVia the power usage chart in the web management interface, the BSP-360 enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the BSP-360 helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, the front panel of the BSP-360 has three LED indicators of different power usages.     Ordering Information BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch
Solar PoE Power Supply for Long Distance Wireless Surveillance SolutionProviding Plug-and-Play instant Internet service, the BSP-360 can be deployed anywhere in the city where there is no direct AC electricity. With PoE over the Cat5 cable, wireless AP and SFP media converter, you can check the current energy consumption and battery status in your office within the configuration interface of the BSP-360.   SOHO / Home-Use Gigabit Ethernet PoE Network DeploymentWith its expanded home-use feature, the BSP-360 Renewable Energy PoE Switch helps SOHO / home users to create an integrated network where power is so easily utilized for transmission of data and video. It integrates IEEE 802.3at PoE technology and renewable power system. The wireless AP and PoE IP camera devices work perfectly with the BSP-360, which injects power through the Ethernet cables, thus helping SOHO / home users to build a cost-effective and reliable PoE networking environment easily.     Wireless Connection for Outdoor Long-range ApplicationWith the four 802.3at/802.3af PoE interfaces, the BSP-360 enables you to install the PoE access point in the outdoors freely. When functioning with a pair of the wireless transmission, the BSP-360 Renewable Energy PoE Switch can be efficiently managed from remote monitor center. It enables the wireless LAN deployment to become more flexible and worry-free from the power outlet locations.**     **To get the best performance, match it with PLANET devices for outdoor wireless bridge applications.   Enables Extension of Network Deployment with Fiber Media Converter With the 24VDC out interface, the BSP-360 enables you to supply power to other device, such as PLANET IGT-905A, that fiber media converter where high-speed and stable data transmission can be made to a remote core network. It can extend the distance to Max. 120 kilometers between BSP-360 and control center via Fiber-Optic Link.     Ordering Information BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch
Physical Port 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port 1 to Port 4) RJ45 type interface for basic management and setup USB type A female for setting file backup and restore Power over Ethernet Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE Backward compatible with IEEE 802.3af Power over Ethernet Up to 4 ports of IEEE 802.3af/802.3at devices powered Supports PoE power up to 30 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100 meters PoE management- Total PoE power budget control- Per port PoE function enable/disable- PoE port power feeding priority- Per PoE port power limitation- PD alive-check- PoE schedule Battery Management Battery type option: Nickel-cadmium battery or lead-acid battery Easy diagnostic of the system operating status via LED indicator Battery current usage and status Battery capacity and power consumption statistics Low voltage cut-off protection: Send alert and cut off the low priority PoE port for the low power battery Pulse Width Modulation (PWM) Protection- Reverse current protection to prevent the current circuits from flowing back to the PV panel- Over-current and over-temperature protection- Reverse polarity protection (for battery and charging electrodes) Industrial Case & Installation IP30 aluminum case DIN-rail and wall-mounted design Supports -10 to 60 degrees C operating temperature Supports ESD 6KV DC Ethernet protection Redundant power design- 24V~45V DC wide power input Switching Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 8K MAC address table size Automatic address learning and address aging Router Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP Static and dynamic (RIP1 and 2) routing IP/MAC-based bandwidth control Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications 802.1d STP and IGMP Proxy Security Port filtering lets you either allow or prevent which applications can access the Internet. MAC filtering allows you to include or exclude computers and devices based on their MAC address URL filtering allows you to control access to Internet websites in an URL list IP source guard prevents IP spoofing attacks DoS attack prevention Management Switch Management Interface- IPv4 Web switch management - SNMP v1, v2c Static and DHCP for IP address assignment System Maintenance- Firmware upload/download via HTTP- Configuration upload/download through HTTP- Hardware reset button for system reboot or reset to factory default NTP Network Time Protocol SNMP trap for interface Link Up and Link Down notification Event message logging to remote syslog server PLANET Smart Discovery Utility   Ordering Information BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch
Hardware Specifications Copper Ports LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode)WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode)  PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4) USB 1 USB Type A female for setting backup Power Output 4 PoE out 51VDC; max. 30 watts per PoE port2 DC out 24@ 1A maximum (four-pin terminal block)* The voltage of DC out is based on the battery. Switch Architecture Store-and-Forward Switch Fabric 10Gbps/non-blocking Switch Throughput@64 bytes 5.95Mpps@64 bytes MAC Address Table 8K entries Shared Data Buffer 512Kbit Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex  Reset Button < 5 sec: System reboot> 5 sec: Factory default LED 3 LEDs for System and Power:  Green: Power  Green: Fault Green: System 4 LEDs for PoE Copper Ports (Port 1~Port 4): Green: LNK/ACT Orange: PoE-in-use 1 LED for 10/100/1000T Copper Port (Port 5): Green: LNK/ACT 3 LEDs for PoE Power Usage (W) Green: 50, 100 and 120W Connector Removable 6-pin terminal blockPin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery Alarm 1 Digital Output (DO):Level 0: -24V~2.1V (±0.1V)Level 1: 2.1V~24V (±0.1V)Open collector to 24V DC, 100mA max. Power Requirements PV in: 24~45V DCBattery in/out: 24V DC Power Consumption/ Dissipation 5.04 watts, 17.1BTU (Standby without PoE function)6.96 watts, 23.7 BTU (Full loading without PoE function)135.36 watts, 461.5 BTU (Full loading with PoE function) Dimensions (W x D x H) 84 x 107 x 152 mm Weight 1026g ESD Protection 6KV DC Enclosure IP30 aluminum case Installation DIN-rail kit and wall-mount ear Power over Ethernet PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE PoE Power Supply Type End-span PoE Power Output Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at)  Power Pin Assignment 1/2 (+), 3/6 (-) PoE Power Budget 120 watts (PoE consumption + DC out and depending on power input) Max. Number of Class 2 PDs 4 Max. Number of Class 3 PDs 4 Max. Number of Class 4 PDs 4 Electrical Characteristics System Voltage Rating 24V DC Maximum Charging Current 6A Max. Solar Array VOC 60V DC Max. Operating Voltage 45V DC Total Current Consumption While operating -32mAAt idle -11mA High Temperature Shutdown 100 degrees C disconnect solar and load80 degrees C reconnect solar and load Battery Charging Characteristics Charge Algorithm Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection. Maximum Output Current 6A Nickel-cadmium Battery ± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55 degrees C(Temperature compensation baseline@ 25 degrees C) Lead Acid Battery (Default Setting) ± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @ 55 degrees C(Temperature compensation baseline@ 25 degrees C) Float Charge Voltage DC 27.2V (26.0~30.0V) Absorption Charge Voltage DC 29.2V (28.0~32.0V) LVD (Low Voltage Disconnection) DC 22.2V (21.0~25.0V) LVR (Low Voltage Reconnection) DC 24.8V (23.0~27.0V) Router Features Internet Connection Type Shares data and Internet access with users, supporting the following internet accesses: PPPoE Dynamic IP Static IP PPTP L2TP Firewall NAT firewall with SPI (Stateful Packet Inspection)Built-in NAT server supporting Port Forwarding, and DMZBuilt-in firewall with IP address/MAC address/Port/ URL filteringSupports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection Routing Protocol Static/Dynamic (RIP1 and 2) routing VPN Pass-through PPTP, L2TP, IPSec, IPv6 LAN Built-in DHCP server supporting static IP address distributionSupports UPnP, Dynamic DNSSupports IGMP ProxySupports 802.1d STP (Spanning Tree)IP/MAC-based bandwidth control Management Management Interface Setup of system/management functionsWeb firmware upgradeSNMP trap for alarm notification of events PoE Management Power limit by consumption and allocationPoE admin modePer port power schedulePer port power enable/disablePower feeding priorityCurrent per port usage and statusTotal power consumptionPD alive checkScheduled power recycling Battery Management Battery current usage and status Battery capacity statisticsLow Voltage Cut-Off Protection Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE Standards Compliance IEEE 802.3 10BASE-T EthernetIEEE 802.3u 100BASE-TX Fast EthernetIEEE 802.3ab 1000BASE-T Gigabit EthernetIEEE 802.3x Flow Control and Back PressureIEEE 802.1D Spanning Tree ProtocolIEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet PlusRFC 768: UDPRFC 791: IPRFC 2068 HTTPRFC 1157: SNMP v1RFC 1902: SNMP v2cRFC 5424: Syslog Environment Operating Temperature: -10 ~ 60 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -10 ~ 70 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Ordering Information BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch
Datasheet Date Version Description Download 2017-02-10 1.0 BSP-360 Quick Guide Date Version Description Download 2016-12-05 1.0 Initial Release Compatible List Date Version Description Download 2017-01-12 1.0 Initial Release Ordering Information BSP-360 Industrial Renewable Energy 4-Port 10/100/1000T 802.3at PoE+ Managed Ethernet Switch

BSP-300

Industrial Solar Power PoE Switch