| Hardware Specification |
| Standard support |
IEEE802.11b/g
IEEE 802.11n
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow Control |
| Chipset |
Ralink RT3050 |
| Memory |
16 Mbytes DDR SDRAM
4 Mbytes Flash |
| Interface |
Wireless IEEE 802.11b/g/n
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX |
| Antenna |
Internal (Default): 12dBi directional antenna (Vertical-Polarization)
■ Horizontal: 60 degree
■ Vertical: 30 degree
External (Option): RP-SMA type Connector
■ Switchable by Software
■ For External Antenna Mode, attach antenna before power on |
| Enclosure |
IP55 waterproof case |
| PoE |
Passive PoE / 12V DC
Reset Button on PoE Injector
LAN RJ-45 Pin Assignment: PIN 4(+), PIN 7,8(-), PIN 5(Reset) |
| Dimension (W x D x H) |
225 x 77 x 60 mm |
| Weight |
255g |
| Wireless Interface Specification |
| Frequency Band |
2.4~2.4835GHz |
| Modulation |
Transmission/Emission Type: DSSS / OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, QPSK, CCK |
| Data Rate |
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
802.11n (20MHz): up to 72Mbps
802.11n (40MHz): up to 150Mbps |
| Opt. Channel |
America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels) |
| RF Output Power |
802.11b: 27 ± 1dBm
802.11g: 26 ± 1dBm
802.11n: 22 ± 1dBm |
| Receiver Sensitivity |
802.11b: -93dBm
802.11g: -91dBm
802.11n: -89dBm |
| Media Access Control |
CSMA/CA |
| Output Power Control |
Range 1~100, default:100 |
| Power Requirements |
12V DC, 1A (switching) |
| Wireless Management Features |
| Wireless Mode |
■ AP
■ Client
■ WDS PtP
■ WDS PtMP
■ WDS Repeater (AP+WDS)
■ Universal Repeater (AP+Client) |
| Channel Width |
20MHz / 40MHz |
| Encryption Security |
64/128-bits WEP
WPA, WPA-PSK
WPA2, WPA2-PSK
802.1X |
| Wireless Isolation |
Able to isolate each connected wireless clients for independent access. |
| Wireless Security |
Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
WPS (WIFI Protected Setup)
Enable/Disable SSID Broadcast |
| B/G Protection Mode |
A protection mechanism prevents collisions among 802.11b/g modes |
| Max. Wireless Client |
25 |
| Max. WDS AP |
4 |
| Software |
| LAN |
Built-in DHCP server supporting static IP address distributing
Supports UPnP
Supports IGMP Proxy, DNS Proxy
Supports 802.1d STP - Spanning Tree Protocol |
| WAN Protocol |
■ Static IP
■ DHCP (Dynamic IP)
■ PPPoE
■ PPTP
■ L2TP |
| VPN Passthrough |
■ PPTP
■ L2TP
■ IPSec |
| Operating Mode |
■ Bridge
■ Gateway
■ Ethernet Converter (WISP) |
| Firewall |
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding (Virtual Server), and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering |
| Max. Wired Client |
60 |
| NTP |
Network Time Management |
| Management |
Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS |
| Diagnostic tool |
System Log |
| Environment & Certification |
| Operation |
Temp.: -20~70 Degree C
Humidity: 10~95% non-condensing |
| Storage |
Temp.: -30~80 Degree C
Humidity: 5~95% non-condensing |
| Regulatory |
CE / RoHS |
