802.11n Enterprise PoE Access Point
PLANET WNAP-3000PE is an Enterprise PoE access point with advanced management features, superior encryption standard but been cost effective. The built-in IEEE802.11n 3 Tx (Transmit chains) / 3 Rx (Receive chains) MIMO technology enables the data rate up to 300Mbps and is compatible with IEEE 802.11b/g devices.
Emphasizing on the enterprise demand, the WNAP-3000PE enhances security and management features including multiple SSID, IEEE 802.1Q VLAN support, WPA support, RADIUS MAC authentication, rogue AP detection and etc. The WNAP-3000PE provides one 1000Mbps-Giga LAN port compliant with 802.3af PoE standard, therefore it can be installed anywhere without the constraint of power socket by just connecting with PLANET PoE Switch that supplies both power and data to it via the RJ-45 cable. Provided multiple reversed-polarity SMA male antenna connectors, the WNAP-3000PE is allowed to connect the suitable external antenna and booster for right wireless environment such as in warehouse, campus or enterprises. |
| |
|
Secured and Managed Enterprise-class WLAN
With support for high-level encryption mechanism, the WNAP-3000PE can effectively prevent your information from eavesdropping by unauthorized users. Allowing multiple different SSIDs to be used simultaneously and cooperating with the VLAN support, the WNAP-3000PE helps network administrators define seperated wireless subnets for various Class-of-service and security policies. |
| |
|
|
• IEEE 802.11n draft 2.0 compliant with IEEE 802.11b/g
• Supports PoE port (IEEE 802.3af compliant)
• Strong network security with WEP, WPA(PSK), 802.1x authentication
• With 3 detachable RP-SMA connectors for expanding of external antenna connection distance
• High data transfer rate up to 300Mbps
• Five operation modes selectable: AP / AP Client / Wireless Bridge / Multiple Bridge / Repeater
• Adjustable output power level
• Supports Multiple SSID, Multiple SSID isolation, 802.1Q VLAN, RADIUS MAC authentication,
Rogue AP detection, Access Control
• Windows-base utility, Web, and CLI (Command Line Interface) Configuration
• SNMP v1, v2, v3 supported |
| |
| Product |
| Standard |
IEEE 802.11b/g, IEEE 802.11n draft 2.0 |
| Modulation |
OFDM / CCK/ DQPSK / DBPSK |
| Port |
10/100/1000Base-T (RJ-45) PoE port, 802.3af compliant |
| Antenna |
Detachable 2dBi Dipole Antenna * 3 |
Output Power
(max.) |
For FCC:
3T x For FCC:
MAX: 22.5 dBm @11B mode
MAX: 20.5 dBm @11G mode
MAX: 22.5dBm @11N mode
For ETSI:
3T x For ETSI :
MAX: 18.5dBm @11B/G/N mode |
| Sensitivity |
11b: 11Mbps@ - 88dBm
11g: 54Mbps@ - 73dBm
11n: 300Mbps@ -69dBm |
| Operating Mode |
AP, AP Client, Wireless Bridge, Multiple Bridge, Repeater |
| Security |
WEP, WPA, and WPA-PSK authentication
802.1x support
EAP-MD5, EAP-TLS, EAP-TTLS, PEAP
RADIUS based MAC authentication
Block inter-wireless station communication (wireless separation)
Block SSID broadcast |
| Wireless Advanced |
Supports Wireless Roaming (Mobility Feature) |
| Management |
Web based configuration
RADIUS Accounting
RADIUS-On feature
RADIUS Accounting update
Telnet / CLI
Syslog / internal Log
Access Control list file support
Configuration file Backup / Restore
Statistics support
LLTD |
|
Datasheet
| Date |
Version |
Description |
Download |
| 2010-03-17 |
1.0 |
WNAP-3000PE |
 |
Firmware
Quick Guide
| Date |
Version |
Description |
Download |
| 2010-03-17 |
1.1 |
Initial release |
|
User's Manual
| Date |
Version |
Description |
Download |
| 2010-03-17 |
1.1 |
Initial release |
|
EC Declaration
| Date |
Version |
Description |
Download |
| 2010-03-17 |
1.0 |
Initial Release |
|
|
|
