10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter
The PLANET FT-807 is a 10/100Base-TX Shielded Twisted Pair (STP) to Fast Ethernet 100Base-FX fiber converter. It supports full-duplex operations at its fiber-optic interface in the form factor of SMI (Small Multimedia Interface) interface. The FT-807 auto-adapts to the highest level of performance supported by the device connected to the STP port.
The SMI (Small Multimedia Interface) is one kind of POF (Plastic Optic Fiber) interface that can suitable for low-cost and high-speed data transmission. The SMI patch cord meets the IEEE 1394b specification that can transmit data at S200 (250Mbps) speed for 50 meters, the distance range of TP port is 100 meters. The FT-807 will make the new generation multimedia life more possible and easy installation. |
|
|
Ordering Information |
FT-807 |
10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter |
Fiber-optic Networking for enterprise, and home With high performance data transmit and easy installation, the FT-807 can building a network solution of FTTH (Fiber To The Home) and small office network environment from enterprise.
POF SMI type connector information The FT-807 is using POF SMI type connector that is mostly being used for IEEE 1394b transmission. The followings show the basic information about POF SMI type connector.
The SMI connector will as like the figure left. You can check with your network device dealer or administrator for the availability of the cable and connector.
The POF Cable should be a dual wire cable with 0.98mm optic core with cladding diameter 1mm. Also with jacket in diameter: 2.2 mmThe optic cable distance can reach 50 meters or above for a pair of FT-807 to FT-807 connection at 100Mbps |
|
|
|
|
Ordering Information |
FT-807 |
10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter |
• Complies with IEEE 802.3u, 10/100Base-TX and 100Base-FX • RJ-45 TP to POF (Plastic Optic Fiber interface) conversion • IEEE 1394b SMI Patch Cord, up to 50m • Low-Cost and High-Speed Data Transmission • Compact Size and Easy Installation |
|
|
Ordering Information |
FT-807 |
10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter |
Standards |
IEEE 802.3u, 10/100Base-TX and 100Base-FX |
TP Connector |
RJ-45 port (Auto-MDI/MDI-X) Twisted Pair, EIA568 |
Fiber Connector |
SMI POF port (multi-mode), 650nm wavelength |
Data Rate |
10/100Mbps (TP); Auto-Negotiation for duplex mode 100Mbps (FX); full-duplex mode |
TP Cable |
4 pair Cat. 3 or 5 UTP, up to 100m |
Fiber Cable |
IEEE 1394b SMI Patch cord (0.98mm /1mm), up to 50m |
LED indicators |
PWR, TP. POF |
Dimensions (W x D x H) |
86 x 62 x 23 mm |
Power Requirement |
5V DC, 2A |
Temperature |
Operating: 0~50 Degree C Storage: -40~70 Degree C |
Humidity |
Operating: 10~90% Storage: 10~90% (Non-condensing) |
Regulation Compliance |
FCC Part 15 Class A, CE |
|
Ordering Information |
FT-807 |
10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter |
Datasheet
Date |
Version |
Description |
Download |
2007-11-23 |
1.0 |
FT-807 |
|
User's Manual
Date |
Version |
Description |
Download |
2007-11-29 |
1.1 |
User's Manual |
|
|
|
Ordering Information |
FT-807 |
10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter |