| Hardware Specification |
| Hardware Specification |
8 x M12, 4-Pin D-coded female connector |
| Power Connector |
1 x M12, 5-Pin A-Coded male connector |
| Enclosure |
IP67 Aluminum |
| Dimension (W x D x H) |
163 x 103 x 53 mm |
| Weight |
976g |
| Power Requirement |
12~48V DC, Redundant power with polarity reverse protection function |
| Power Consumption / Dissipation |
4 Watts / 13 BTU |
| Installation |
DIN rail kit and wall mount ear |
| ESD Protection |
6KV DC |
| EFT Protection |
6KV DC |
| LED Indicators |
Power LED: • Power 1 / Power 2 / FAULT (Green) 10/100Base-TX Port (Port-1 to Port-8): • LNK/ACT (Green) |
| Network Cables |
10Base-T: 2-Pair UTP Cat.3,4,5 up to 100m (328ft) 100Base-TX: 2-Pair UTP Cat.5, 5e, 6 up to 100m (328ft) EIA/TIA-568 100-ohm STP (100m, max.) |
| Switch Specification |
| Switch Processing Scheme |
Store-and-Forward |
| Address Table |
2K entries |
| Flow Control |
Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex |
| Switch Fabric |
1.6Gbps |
| Throughput (packet per second) |
1.19Mpps@64Bytes |
| Maximum Transmit Unit |
1536 bytes |
| Standards Conformance |
| Standards Compliance |
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
| Environment |
| Temperature |
Operating: -40~75 Degree C Storage: -40~75 Degree C |
| Humidity |
Operating: 5~95% (Non-condensing) Storage: 5~95% (Non-condensing) |
| Standard Accessories |
| Packet Contents |
1 x M12 4-Pin D-Coded Male connector to RJ-45 Ethernet cable, 1.2m 1 x M12 5-Pin A-Coded Female connector power cable, 1.2m 1 x Wall-Mount Kit 1 x DIN-Rail Kit (attached to M12 switch as default) 1 x User’s Manual |