IVC-2004PT

4-Port 10/100Base-TX with PoE + 1-Port BNC / RJ-11 Industrial Ethernet Extender

 
 
The PLANET IVC-2004PT, an Industrial grade Ethernet Extender with PoE supported, integrates three advanced technologies:
　　• Ethernet extend over coaxial cable or phone wire
　　• IEEE 802.3af Power over Ethernet
　　• Industrial wide range operating temperature
The IVC-2004PT is designed to utilize the commonly existed coaxial cables or phone wires to extend the UTP Ethernet over 100m distance limitation and transmits both power and data over single Ethernet cable to remote PoE capable devices in heavy industrial demanding environments. 

IEEE 802.3af Power over Ethernet Integrated
The IVC-2004PT provides 4 10/100Mbps copper ports with 4-Port IEEE 802.3af Power over Ethernet inject interfaces delivered in an IP-30 rugged strong case. Supporting up to 15.4Watts power per port for any remote IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE wireless LAN access point, the IVC-2004PT is an ideal solution to deploy surveillance system, secure control and wireless service in climatically demanding wide temperature range (-40 to 75 Degree C) environments. 

Long Reach Ethernet
To extend the network distance and provide reliable Ethernet networking in harden environments, the IVC-2004PT equips one asymmetric / symmetric Ethernet extender port– the extender port can be RJ-11 or BNC Connector. Customers can use either BNC or RJ-11 for their network deployment and the IVC-2004PT offers the absolutely fastest data transmission speed up to 99/65Mbps over existing coaxial cable and telephone wire without the need of rewiring. 

Flexible Combination of Applications
The IVC-2004PT helps users to flexibly re-deploy a new local Intranet in the apartment, intelligent transportation systems, building automation, campus and hospitality environment by applying the original network structure without spending extra cost. The IVC-2004PT can be adjusted to Master or Slave mode via a DIP switch. It also can be setup to connect with another one IVC-2004PT or with other PLANET Ethernet extenders- the IVC-2002, VC-201A and VC-202A. Therefore, users can easily expand the current network structure easily and with more flexibilities.
　　
　　　　


Environmentally Hardened Design for Industrial PoE Networks
The IVC-2004PT provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments like plant floors or in curb side traffic control cabinets. The IVC-2004PT is packaged in a compact, IP-30 rugged strong case that allows operating in wide temperature range of -40 to 75 Degree C and installation with either DIN Rail or Wall mounting for efficient use of cabinet space.
 
Ordering Information
IVC-2004PT 4-Port 10/100TX with PoE+ 1-Port BNC / RJ-11 Industrial Ethernet Extender (-40 ~ 75 Degree C)
Industrial Area Department / Workgroup PoE Switch
With 4 PoE, in-line power interfaces, the PoE Industrial Ethernet Extender IVC-2004PT can build a power centrally controlled IP phone system, IP camera system, or wireless AP group for the enterprise. For instance, 4 IP cameras or wireless APs can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the offices. Without the power-socket limitation, it makes the installation of cameras or WLAN AP more easily and efficiently.
 
 
Flexible Industrial Extender integrates BNC and RJ-11 Connection
The IVC-2004PT can operates stably under temperature range from -40 to 75 Degree C so it can be installed in any harsh environment. It also compatibles with PLANET Ethernet over VDSL2 Converter VC-201A and VC-202A therefore users do not need to spend extra cost to deploy a new local Internet in apartment, hotel, campus and hospitality environment. The network administrator can re-deploy the original network structure with the IVC-2004PT with no further effort. For example, PLANET MC-700, MC-1500 and MC-1500R chassis with the VC-201A and VC-202A inside are set as CPE (Customer Premises Equipment) mode which placed in the wiring center (MDF room). On the other hand, connects an IVC-2004PT extender with Master mode by using telephone line or coaxial cable. Therefore, the new network structure can be constructed efficiently.
 
 
Ordering Information
IVC-2004PT 4-Port 10/100TX with PoE+ 1-Port BNC / RJ-11 Industrial Ethernet Extender (-40 ~ 75 Degree C)
• Ethernet over Twist pair / Coaxial
• Cost-effective Long Reach Ethernet (LRE) solution
• One box design, Master / Slave mode selectable via DIP Switch
• Selectable BNC and RJ-11 mode for the data transmission
• Defines Asymmetric (Band Plan 998) and Symmetric band plans for the transmission of Upstream 
　and Downstream signals

IEEE 802.3af PoE
• 4 x Ports IEEE 802.3af Power over Ethernet / PSE Standard
• 48V DC Power Input for PoE and 12~ 36V DC for Non-PoE devices
• Supports PoE Power up to 15.4 Watts for each PoE port
• Auto-Detect powered device (PD)
• Circuit Protection prevent power interference between ports
• Remote power feeding up to 100m

Industrial Design
• IP-30 Aluminum Metal case Protection
• -40~75 Degree C Operating Temperature
• DIN Rail and Wall Mount Design
• Redundant Power Design: 48V DC Power Input for PoE 
• Supports EFT protection 6000V DC for power line 
• Supports 6000V DC Ethernet ESD protection

Data Communication
• Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
• Auto-MDI / MDI-X detection and Auto-Negotiation with Half-Duplex / Full-Duplex modes for 
　10 / 100Base-TX RJ-45 port
• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control 
　(Full-Duplex)
• Supports up to 1536 bytes packet size, 802.1Q VLAN tag transparent
• Integrated address look-up engine, supports 2K absolute MAC addresses
 
Ordering Information
IVC-2004PT 4-Port 10/100TX with PoE+ 1-Port BNC / RJ-11 Industrial Ethernet Extender (-40 ~ 75 Degree C)
Hardware Specification
Extender Ports • Coaxial: 1 BNC, female connector 
• Phone-Line: 1 RJ-11, female connector
Ethernet LAN Ports • 10/100Base-TX: 4 RJ-45, Auto-Negotiation and Auto-MDI / MDI-X
• 4 PoE Ports (Port1 ~ 4)
DIP Switch 4 position DIP switch
Functionality • Master / Slave mode select 
• Selectable BNC and RJ-11 mode
• Selectable target Band Plan
• Selectable target SNR mode
Encoding • DMT (Discrete Multi-Tone) line coding
- ITU-T G.997.1
- ITU-T G.993.1 
- ITU-T G.993.2 (VDSL2 Profile 17a Support)
LED Indicators • System
　P1 (Green)
　P2 (Green)
　Fault (Green)

• VDSL2
　Master (Green)
　Slave (Green)
　ACT (Green)
　Sync. (Green)

• 10/100Mbps port
　LNK / ACT (Green)
　PoE In-Use (Orange)
Cabling • Ethernet : 10Base-T: 2-pair UTP Cat.3, 4 and 5 up to 100m (328ft)
• Ethernet : 100Base-TX: 2-pair UTP Cat.5, 5e and 6 up to 100m (328ft) 
• Coaxial Cable: 
　　　　–50ohm, RG58A / U, RG58C / U, RG58 / U or equivalent;
　　　　–75ohm, RG-6 (Distance up to 2.4km) 
• Twisted-pair telephone wires (AWG24 or better) up to 1.4km
Dimension (W x D x H) 135 x 87.8 x 50 mm
Weight 631g
Power Requirement 48V DC for PoE Devices
12 ~ 36V DC for Non-PoE Devices
Redundant power with polarity reverse protection function
Power Consumption 66.4Watts / 226BTU Max. (PoE)
5.64Watts / 19.24BTU (Non-PoE)
Installation DIN Rail kit and Wall Mount ear
Alarm Provides one relay output for power fail 
Alarm Relay current carry ability: 1A @ DC 24V
Performance
BNC (Coaxial Cable) Asymmetric (Download / Upload)
　200m -> 99/65Mbps
　400m -> 99/64Mbps
　600m -> 97/59Mbps
　800m -> 94/51Mbps
　1000m -> 84/45Mbps
　1200m -> 73/37Mbps
　1400m -> 61/28Mbps
　1600m -> 54/20Mbps
　1800m -> 48/13Mbps
　2000m -> 38/9Mbps
　2200m -> 35/6Mbps
　2400m -> 31/4Mbps

Symmetric (Download / Upload)
　200m -> 95/99Mbps
　400m -> 92/97Mbps
　600m -> 81/82Mbps
　800m -> 71/70Mbps
　1000m -> 60/57Mbps
　1200m -> 50/44Mbps
　1400m -> 42/33Mbps
　1600m -> 37/27Mbps
　1800m -> 29/22Mbps
　2000m -> 23/21Mbps
　2200m -> 19/17Mbps
　2400m -> 19/13Mbps
RJ-11 (Phone-Line) Asymmetric (Download / Upload)
　200m -> 99/63Mbps
　400m -> 91/48Mbps
　600m -> 71/32Mbps
　800m -> 53/18Mbps
　1000m -> 38/8Mbps
　1200m -> 33/5Mbps
　1400m -> 28/2Mbps

Symmetric (Download / Upload)
　200m -> 91/99Mbps
　400m -> 74/79Mbps
　600m -> 54/51Mbps
　800m -> 38/34Mbps
　1000m -> 27/21Mbps
　1200m -> 24/15Mbps
　1400m -> 21/10Mbps
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Type End-Span
PoE Power Output 48V DC Per Port, 350mA. Max. 15.4 Watts
PoE Pin Assignment 1/2(+), 3/6(-)
Standard Conformance
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3af Power over Ethernet
IEEE 802.3x Full Duplex Pause Frame Flow-Control
ITU-T
- G.993.1
- G.997.1
- G.993.2 (Profile 17a Support)
Environment
Operating Temperature -40 ~ 75 Degree C
Operating Humidity 5~90%, relative humidity, non-condensing
Storage Temperature -40 ~ 85 Degree C
Storage Humidity 5~90%, relative humidity, non-condensing
Ordering Information
IVC-2004PT 4-Port 10/100TX with PoE+ 1-Port BNC / RJ-11 Industrial Ethernet Extender (-40 ~ 75 Degree C)

Datasheet

Date Version Description Download
2012-02-15 1.0 IVC-2004PT

User's Manual

Date Version Description Download
2010-11-12 1.1 Initial release

EC Declaration

Date Version Description Download
2011-04-29 1.0 Initial Release
Ordering Information
IVC-2004PT 4-Port 10/100TX with PoE+ 1-Port BNC / RJ-11 Industrial Ethernet Extender (-40 ~ 75 Degree C)